support@designbyuapparel.shop+1 818 383 0239
Tri-Blend Tee laid flat and unprinted

Shown unprinted in Heather Bone. Garment photography is of the blank we stock; your artwork is not shown on it here.

01 Tees & Tops

Tri-Blend Tee

A soft, drapey 150 gsm heather. Expect a vintage, slightly washed print rather than a hard opaque block. Colour shift on this body is normal, not a defect.

Single piece, before band discount
$18.00USD
Garment price by quantity band
QuantityBandGarment, each
1 – 11List$18.00
12 – 238% off$16.56
24 – 4714% off$15.48
48 – 9921% off$14.22
100 +29% off$12.78

Printing is charged on top of the garment and depends on the method, how many positions you print, and how many colours are in the artwork. The studio quotes the two together, calculated on our server. How the bands work.

Garment specification

Fibre content
50% polyester, 25% combed cotton, 25% rayon
Weight
150 gsm
Country of origin
Nicaragua
Fabric class
Tri-blend knit

Garment care

Machine wash cold. Tumble dry low or hang to dry. Do not bleach. Do not use fabric softener.

Care once printed

Wash inside out, cold, on a gentle cycle. Tumble dry low or hang to dry. Do not iron directly on the printed area, and do not use bleach or fabric softener on it. Wash printed garments separately for the first two cycles.

Colourways (6)

  • Heather Bone
  • Heather Charcoal
  • Heather Navy
  • Heather Olive
  • Heather Rust
  • Heather Slate

Sizes (7)

  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL

Colour names describe the garment as dyed. Screen rendering of a colour name is not a colour match, and printed ink on that garment is a separate approximation again. How we handle colour

What limits this body

  • Heathered ground. Ink colour shifts more on this body than on solid cotton, and the shift is more visible on light inks.
  • Not compatible with direct-to-garment. The blend sits at 25% cotton.
  • Polyester fraction can bleed into light inks at cure temperature; we underbase to control it, which slightly softens fine detail.

Where it can be printed

Printable areas, drawn to scale on a 16 by 20 inch field
12 x 16 in12 x 16 in4 x 4 in3.5 x 3.5 in
  • Front centre12 x 16 in / 30.5 x 40.6 cm
  • Back centre12 x 16 in / 30.5 x 40.6 cm
  • Left chest4 x 4 in / 10.2 x 10.2 cm
  • Sleeve3.5 x 3.5 in / 8.9 x 8.9 cm

Dashed edge is the printable boundary. The inner line is the safety margin, and artwork that crosses it risks landing on a seam or a hem. Placement tolerance on press is plus or minus 3 mm.

Positions on this garment
PositionMaximum, inchesMaximum, centimetres
Front centre12 x 1630.5 x 40.6
Back centre12 x 1630.5 x 40.6
Left chest4 x 410.2 x 10.2
Sleeve3.5 x 3.58.9 x 8.9

Method limits apply on top of these. Embroidery, for example, works to a 4 by 4 inch field regardless of how large the garment position is. The studio applies whichever limit is smaller and tells you which one it used.

Methods that run on tri-blend knit

4 of 6 methods are available on this fabric. The rest are listed below with the physical reason they are not. Nothing in this list changes after you place an order.

Available

  • M1Screen Printfrom 12 pieces

    Up to 6 spot colours per position · up to 12 x 16 in

    The polyester in a tri-blend can migrate into light ink at cure temperature. We print an underbase to hold it back, which softens fine detail slightly.

  • Full colour, no colour count · up to 11 x 14 in

  • M4Embroideryfrom 6 pieces

    Up to 12 thread colours per design · up to 4 x 4 in

    Lightweight tri-blend needs cut-away backing behind the stitch. You will feel a stiffened patch on the inside of the garment.

  • Single colour, or layered up to 3 colours · up to 11 x 14 in

Not available on this fabric

  • Direct-to-garment pigment bonds to cotton fibre. A tri-blend is 25% cotton, so three quarters of the surface has nothing for the ink to hold onto and the print washes out unevenly.

  • Half the fibre is polyester and half is not. The result is a washed-out image at roughly half strength, which we will not ship.

Measurements

Adult tees and tanks. All figures are measured flat and doubled where relevant. Tolerance is plus or minus 1 cm. A garment measuring inside that tolerance matches its label.

Adult tees and tanks measurements in inches and centimetres
SizeChest, inChest, cmLength, inLength, cmSleeve, inSleeve, cm
XS1743.226667.519.1
S1845.727.569.9820.3
M2050.828.572.48.521.6
L2255.929.574.9922.9
XL246130.577.59.524.1
2XL266631.5801025.4
3XL2871.132.582.610.526.7
Diagram showing where chest, body length and sleeve are measured on a garment laid flat

Full charts for every line on the size guide.

Others in Tees & Tops